Custom Fabrication · TS-GT
Gates & Fences
Swing and sliding gates and fence panels for sites, compounds and buildings, ready for automation.
Drag to orbit · scroll to zoom
Real-time 3D · illustrative
Overview
Gates are framed in steel hollow section with bar, mesh or laser-cut infill, hot-dip galvanised for outdoor life and prepared for motors and access control.
Key features
- Ready for motors and access control
- Galvanised for outdoor use
Applications
Where it is used
- Compounds and site entrances
- Factories and utility yards
Specifications
Technical data TS-GT
| Product family | TS-GT — Gates & Fences |
|---|---|
| Frame | Steel hollow section 40 × 40 to 100 × 100 mm |
| Infill | Bars, welded mesh or laser-cut sheet |
| Types | Swing, sliding, cantilever sliding |
| Finish | HDG + powder coat |
| Code format | Made to order |
| Code example | TS-GT-[project] |
Built to your drawings
Sizes, profiles, glass and hardware are confirmed per project. Performance values are stated only where a test report from us or the system supplier covers the exact construction.
Finishes
Available finishes
HDGHot-dip galvanised after fabricationBS EN ISO 1461 — mean zinc ≥ 55 µm on steel 1.5–3 mm (≥ 45 µm below 1.5 mm)
PCSPowder coat RAL, steel60–80 µm polyester after phosphate pre-treatment
Process
From survey to installation
- Site surveyOpenings measured on site before any drawing is issued.
- Shop drawingsElevations, sections and schedules submitted for approval.
- Samples & approvalFinish, profile and hardware samples approved before production.
- FabricationCut, machined, welded or crimped in our workshop.
- InstallationInstalled, sealed and handed over by our own crews.
Need a submittal?
We prepare the technical submittal for TS-GT: datasheet, dimensioned drawings, material certificates and samples, ready for consultant review.
Request technical submittal